Blumat Distribution Dripper Set for More Drip Points
$24.95
Turn one Blumat sensor into up to 10 drip points — for wide pots, planter boxes, and full rows of plants.
Free shipping Over $25
3-Year Warranty
Fast Dispatch (2-5 Days)
30-day easy Return
official Blumat USA Distributor
Distribution dripper set that turns a single Blumat sensor into up to 10 drip points. Includes 8 T-fitting drippers for chaining and 2 end-piece drippers, plus 6.5 ft of 3 mm drip tubing. Compatible with Tropf-Blumat and Blumat Drip Maxi sensors.
Connect the T-fitting drippers in a chain from your Blumat sensor's drip outlet, using the included 3 mm tubing to space them where you want water released. Cap each chain with an end-piece dripper. Place drippers around a single large plant for even coverage, or run a row of drippers down a planter to water multiple plants from one sensor.
8 T-fitting distribution drippers, 2 end-piece drippers (one per chain), and 6.5 ft of 3 mm drip tubing.
Best for large pots, long planter boxes, raised beds, plant rows, and anyone running a Blumat Drip or Maxi sensor who wants to spread water across multiple drip points instead of buying additional sensors.
Orders ship free over $25 in 2-5 days in the continental USA. 30-day easy returns, no questions asked.
Covered by the official Blumat 3-year warranty from the date of purchase. If something does not perform as expected email help@blumatdrip.com.
You might also need:
Add 3 mm tubing to your order
Branching out? You'll probably want more 3 mm drip tubing to reach every spot.
Installation Guide
How to Set Up Your System
Takes just a few minutes. Once set up, your plants water themselves.
Step 1
Plan Your Drip Points
Decide where you want water released — around one large plant for even coverage, or down a row to feed multiple plants from one sensor.
Step 2
Cut the 3 mm Tubing
Cut short lengths of the included tubing to space drippers up to 39 in from the sensor.
Step 3
Chain the Drippers
Connect T-fittings in line, push tubing fully into each barb, and cap the chain with an end-piece dripper.
Step 4
Test the Flow
Run water from the sensor and confirm every dripper releases evenly. Adjust the black screw on top of each dripper to fine-tune output.
Important setup note
3 mm drip tube is the smaller of the two Blumat line sizes — it carries water from each sensor to the plant. Use 3 mm fittings to extend the line, split it to a second drip point, or repair a damaged section.
Pro tip
One sensor can run up to 5 drippers in a standard setup — or as many as 25 in pressurized systems by adjusting the black screw on each dripper head. Cheaper than adding more sensors for the same coverage.
PLANT DRIVEN WATERING
Never Water Your Plants Again
Most watering systems run on a timer. Ours runs on a plant. No timers, electricity, or apps needed. Set it up in 30 minutes with only a pair of scissors. Powering greenhouses and home gardens across Europe since 1965 and now available in the USA.
One Sensor, 10 Drip Points
Branch a single Tropf-Blumat or Maxi sensor into as many as 10 watering spots — same flow control, much wider coverage.
The Fun Part
Building a Blumat system is honestly satisfying. Every part slides together cleanly, and you can rearrange the whole layout in an afternoon if you want.
One Less Reason to Hand-Water
Every fitting in the catalog is a step toward a system that runs on its own. Add it once, water automatically for years.
For the Next Plant
It's nice to have extra fittings on hand for those times new plants just show up at your house
Austrian Engineering
The same precision that makes Blumat sensors work for 60+ years lives in every connector, valve, and tube in the catalog.
Designed to Disappear
Tubes route flush against walls and pots. Once your system is in place, the watering becomes invisible — and so does the gear.
What's in the Box?
8 T-Fitting Drippers
Chain these together along your tubing line — each one releases water at its own spot. Connects with tubing on both sides so you can branch up to 5 drippers per chain.
2 End-Piece Drippers
Cap the end of each dripper chain. Only one tubing connection (no through-flow), so water releases at the final spot in the line.
6.5 ft of 3 mm Drip Tubing
The connecting tubing between drippers. Cut to length to space your drip points exactly where you need them — close together around one big plant, or spread out across a row.
Water More with One Sensor
How Distribution Drippers Work
One Sensor in the Pot
lace a Tropf-Blumat or Maxi sensor anywhere along your planter or large pot.
Chain Drippers Outward
Branch the sensor's drip line around a large plant or group of plants spaced wherever they need water.
Or Run a Row
Run a single line of drippers down a planter box — one drip point per plant, one sensor at the end of the row.
Adjust the Flow
With water flowing from the sensor, turn the black screw on top of any dripper to fine-tune how much water it releases at that point.
Even Watering, Every Plant
One sensor's worth of moisture control, spread across as many as 10 drip locations — or up to 25 in pressurized systems.
Upgrade your system
You Might Also Like
Perfect For You If...
You Have a Wide Planter
Long troughs, window boxes, and raised beds need water in multiple spots — one drip point leaves half the soil dry.
You Have a Big Pot
One sensor waters one place. Anything over 12 in across benefits from spreading the water around the root zone.
You're Watering a Row
Run a row of drippers down a planter box and feed every plant from a single Blumat sensor at the end of the line.
You Want Even Moisture
Stop the "wet in the middle, dry at the edges" pattern that comes from a single drip point in a wide container.
Join our Gardening Community
Authorized Distributor
We partner directly with Blumat to provide you with authentic, precision-engineered Austrian components.
Expert Support
Our team actually grows with these systems. We help you design the perfect setup for your greenhouse or garden.
3-Year Warranty
We stand behind our products. Every system is backed by a manufacturer's warranty against defects.